Raymond Mill For Activated Carbon
Output: 0.3-20t/h
Finished size: 38-180μm
Raymond mill is an auxiliary equipment in the activated carbon plant.
The main raw materials of activated carbon can be almost all carbon-rich organic materials, such as coal, wood, fruit shells, coconut shells, walnut shells, etc. These carbon-containing materials are converted to activated carbon by pyrolysis in an activation furnace at high temperatures and under certain pressure. Generally, finished activated carbon has different sizes. How to process activated carbon into powdery material? Our Raymond mill is designed to process powdery activated carbon.
Raymond mill is widely used in the grinding and processing of mineral products and materials in the fields of activated carbon, metallurgy, building materials, chemical industry, mining, etc. It is suitable for processing various nonflammable and explosive minerals with Mohs hardness below seven levels and humidity below 6%, such as activated carbon, gypsum, talc, calcite, limestone, marble, etc., and can meet the requirements of different users.
Advantages of Raymond mill
High wear resistance
The important parts are made of thickened and high-quality steel, wear-resistant parts are made of high-performance wear-resistant materials.
Simple and convenient
The electrical system is centralized control, the workshop basically realizes unmanned operation, and the maintenance is convenient.
Yield stabilization
The important parts are made of thickened and high-quality steel, wear-resistant parts are made of high-performance wear-resistant materials.
environmental protection
The multi-cyclone dust removal and residual wind pulse dust collection system is adopted to reduce the spillover dust.
Working principle of activated carbon dryer
- bucket elevator to transport materials to the storage bin
- The electromagnetic vibration feeder is evenly sent to the grinding room of the main machine
- Materials in the grinding room are picked up by the shovel knife and are ground between the grinding roll and the grinding ring
- The blower blows air from the diverter into the grinding chamber and sends the pulverized powder to the analysis chamber
- The speed regulating motor drives the sorting of the rotating analysis impeller through the transmission device, the large particle material falls back to the grinding chamber, re-grinding, and the qualified fine powder enters the finished cyclone powder collector with the air flow, separates from the air, and is discharged from the discharge port to the finished product.
Parameters of Raymond mill
| Models | Roller | Nominal diameter of grinding ring (mm) | Maximum feed size (mm) | Granularity (μm) | Output (t/h) | Power (kw) |
| 2R | 3 | 780 | ≤15 | 38-180(80-400mesh) | 0.3-2.5 | 49.5 |
| 4R | 4 | 970 | ≤25 | 1-4 | 101 | |
| 5R | 4 | 1270 | ≤30 | 2-8 | 198.5 | |
| 6R | 5 | 1700 | ≤40 | 5-20 | 400 |
Why choose AGICO?
AGICO is a leading supplier of activated carbon making machines, and we can offer a one-stop solution for activated carbon plants, including design, equipment supply, spare parts supply, maintenance, and other custom services. Our products have been exported to Russia, USA, Japan, Sudan, kenya, Australia, etc.
quality control
strong capacity
low cost
custom design
